 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC292LC3B v00.0405 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Typical Applications The HMC292LC3B is ideal for: * Point-to-Point Radios Features Passive: No DC Bias Required Input IP3: +20 dBm LO/RF Isolation: 40 dB Wide IF Bandwidth: DC - 8 GHz RoHS Compliant 3x3 mm SMT Package 7 MIXERS - SMT * Point-to-Mulit-Point Radios & VSAT * Test Equipment & Sensors * Military End-Use Functional Diagram General Description The HMC292LC3B is a general pupose passive double balanced mixer in a leadless RoHS-Compliant SMT package that can be used as an upconverter or downconverter between 16 and 30 GHz. This mixer requires no external components or matching circuitry. The HMC292LC3B provides excellent LO to RF and LO to IF suppression due to optimized balun structures. The mixer operates with LO drive levels above +9 dBm. The HMC292LC3B eliminates the need for wire bonding, allowing use of surface mount manufacturing techniques. Electrical Specifications, TA = +25 C, IF= 1 GHz, LO= +13 dBm* Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) IP2 (Input) 1 dB Gain Compression (Input) 34 24 14 Min. Typ. 16 - 26 DC - 8 8 8 40 32 25 18 48 13 11 11 32 28 24 Max. Min. Typ. 26 - 30 DC - 8 9.5 9.5 40 34 30 21 50 14 12.5 12.5 Max. Units GHz GHz dB dB dB dB dB dBm dBm dBm *Unless otherwise noted, all measurements performed as downconverter, IF= 1 GHz. 7 - 150 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v00.0405 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Conversion Gain vs. Temperature 0 Isolation 0 -10 LO/RF LO/IF RF/IF CONVERSION GAIN (dB) -5 ISOLATION (dB) -20 -30 -40 -50 -60 15 17 19 21 23 25 27 29 31 15 17 19 21 23 7 MIXERS - SMT 7 - 151 -10 -15 +25 C +85 C -40 C -20 FREQUENCY (GHz) 25 27 29 31 FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 Return Loss 0 CONVERSION GAIN (dB) -10 RETURN LOSS (dB) -5 -5 LO RF -10 -15 +9 dBm +11 dBm +13 dBm +15 dBm -15 -20 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) -20 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) IF Bandwidth IF CONVERSION GAIN & RETURN LOSS (dB) 0 Upconverter Performance Conversion Gain vs. LO Drive 0 CONVERSION GAIN (dB) -5 -5 -10 -10 +9 dBm +11 dBm +13 dBm +15 dBm -15 CONVERSION GAIN RETURN LOSS -15 -20 0 2 4 6 8 10 IF FREQUENCY (GHz) -20 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v00.0405 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Input IP3 vs. LO Drive * 25 Input IP3 vs. Temperature * 25 INPUT IP3 (dBm) 15 INPUT IP3 (dBm) 7 MIXERS - SMT 20 20 15 10 +9 dBm +11 dBm +13 dBm +15 dBm 10 +25 C +85 C -40 C 5 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) 5 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) Input IP2 vs. LO Drive * 80 70 INPUT IP2 (dBm) Input IP2 vs. Temperature * 80 70 INPUT IP2 (dBm) 60 50 40 30 20 10 +25 C +85 C -40 C 60 50 40 30 20 10 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) +9 dBm +11 dBm +13 dBm +15 dBm 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) Input P1dB vs. Temperature 18 16 INPUT P1dB (dBm) 14 12 10 8 6 15 17 19 21 23 25 27 29 31 FREQUENCY (GHz) +25 C +85 C -40 C MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 23 87 xx xx 1 13 0 72 89 xx 2 47 50 64 88 86 3 xx 51 72 73 95 4 xx xx 89 92 104 RF = 22 GHz @ -10 dBm LO = 21 GHz @ +13 dBm All values in dBc below the IF output power level. * Two-tone input power = -10 dBm each tone, 1 MHz spacing. 7 - 152 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v00.0405 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (Ta = 85 C) (derate 4.0 mW/C above 85 C) Thermal Resistance (junction to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +13 dBm +27 dBm 150 C 260 mW 250 C/W -65 to +150 C -40 to +85 C Class 1C 7 MIXERS - SMT 7 - 153 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA. 2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL. 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM - C - 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 8. CLASSIFIED AS MOISTURE SESITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v00.0405 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Pin Descriptions Pin Number Function Description Interface Schematic 7 MIXERS - SMT 1, 3, 4, 6, 7, 9 GND Package bottom must also be connected to RF/DC ground. 2 LO This pin is DC coupled and matched to 50 Ohm from 16 to 30 GHz. 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result. 8 RF This pin is DC coupled and matched to 50 Ohm from 16 to 30 GHz. 10, 11, 12 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 7 - 154 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC292LC3B v00.0405 GaAs MMIC FUNDAMENTAL MIXER, 16 - 30 GHz Evaluation PCB 7 MIXERS - SMT List of Materials for Evaluation PCB 109952 [1] Item J1 - J2 J3 U1 PCB [2] Description SRI SMA Connector Johnson SMA Connector HMC292LC3B Mixer 108777 Evaluation PCB [1] Reference this number when ordering compete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 155 |
Price & Availability of HMC292LC3B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |